To:
From:
Message:

SOLIDWORKS Online Training

A comprehensive library of SOLIDWORKS online self-paced courses and assessments. Trust our industry leading experts from Tata Technologies as they provide in-depth instruction and practice along with our Try It exercises. Earn i GET IT Learning Points and earn Certificates for completing your training courses. Browse through our full list of SOLIDWORKS courses below.

All SOLIDWORKS Courses Included in:

image
Overview: This course is designed to teach you how to create and manage both electrical and conduit routes using the SOLIDWORKS Routing more... add-in. Included in this course is an overview of how to create electrical routing components and their design requirements. Users will also learn how to document wire information, create flattened route/harness drawings, and use custom libraries. Key topics include: routing options, system options, library components, Excel, cable route, manual route, from/to list, reroute, coverings, flatten route drawings, pipe/conduit route, electrical route, and flexible conduit.
Duration: 2 hrs. Skill level: Advanced

image
Overview: SOLIDWORKS Flow Simulation is a full featured Computation fluid dynamics (CFD) program that simplifies your computational flu more...id dynamic studies, making them more accessible to the average user. Where FloXpress has its limitations, Flow Simulation provides increased parameter and boundary control, a variety of plots, mesh refinement, and transient analysis. Use it to simulate liquid and gas flow in real world conditions, run "what if" scenarios, heat transfer studies, and much more. The SOLIDWORKS Flow Simulation 2014 course will teach you how to set up, run and view results of a fluid flow and/or heat transfer analysis using SOLIDWORKS Flow Simulation. It will guide you through the necessary commands, menus, and options required to run a Flow Simulation analysis. Project lessons let you practice various simulation studies, helping you to reinforce what you`ve learned.
Duration: 4 hrs. Skill level: Advanced

image
Overview: This course is intended to teach users how to create molds for parts using the various mold automation tools available in SOL more...IDWORKS. The course initially walks users through industry standards and mold design basics, providing you with a foundation for your mold designs. The second half of the course shows SOLIDWORKS mold designers how to insert Parting Lines, apply Tooling Splits, generate Parting Surfaces, and apply Shut-off Surfaces. Users will also learn how to analyze parts for mold design using Draft Analysis and Undercut Detection. Key topics include: Scaling for Shrinkage, Core Features, Body Feature History, Mold Assembly, and Resolving Draft Problems.
Duration: 3 hrs. Skill level: Advanced

image
Overview: This course is designed to teach you the fundamentals of creating and running Motion studies for your SOLIDWORKS models, from more... simple animations to dynamic motion analyses. You will learn what Motion is and what you can do with it, the basic concepts involved in a motion study, how to define contact and friction, CAM integration, motion optimization, and how Motion works with SOLIDWORKS Simulation.
Duration: 4 hrs. Skill level: Advanced

image
Overview: The SOLIDWORKS 2014 Surface Design course is intended to teach users how to generate complex surfaces using lofts and sweeps more...with guide curves. You`ll also learn techniques for editing surfaces including trim, extend, fillet and knit surfaces. Upon completion of this course, you`ll be ready to start working with complex surfaces.
Duration: 3 hrs. Skill level: Advanced

image
Overview: This course is designed to teach users how to work with weldments in SOLIDWORKS 2014. You’ll learn how to create weldments, a more...pply welds, manage weldments, and document your weldments in drawings. Upon completion of this course, you’ll have the tools you need to use SOLIDWORKS 2014 for your weldments. The course duration is approximately 3 hours and 30 minutes.
Duration: 3 hrs. Skill level: Advanced

image
Overview: This course is designed to teach you how to create and manage both electrical and conduit routes using the SOLIDWORKS Routing more... add-in. Included in this course is an overview of how to create electrical routing components and their design requirements. Users will also learn how to document wire information, create flatten route/harness drawings, and use custom libraries. Key topics include: routing options, system options, library components, Excel, cable route, manual route, from/to list, reroute, coverings, flatten route drawings, pipe/conduit route, electrical route, and flexible conduit.
Duration: 2 hrs. Skill level: Advanced

image
Overview: SOLIDWORKS Flow Simulation is a full featured Computation fluid dynamics (CFD) program that simplifies your computational flu more...id dynamic studies, making them more accessible to the average user. Where FloXpress has its limitations, Flow Simulation provides increased parameter and boundary control, a variety of plots, mesh refinement, and transient analysis. Use it to simulate liquid and gas flow in real world conditions, run "what if" scenarios, heat transfer studies, and much more. The SOLIDWORKS Flow Simulation 2013 course will teach you how to set up, run and view results of a fluid flow and/or heat transfer analysis using SolidWorks Flow Simulation. It will guide you through the necessary commands, menus, and options required to run a Flow Simulation analysis. Project lessons let you practice various simulation studies, helping you to reinforce what you`ve learned.
Duration: 4 hrs. Skill level: Advanced

image
Overview: This course is intended to teach users how to create molds for parts using the various mold automation tools available in SOL more...IDWORKS. The course initially walks users through industry standards and mold design basics, providing you with a foundation for your mold designs. The second half of the course shows SOLIDWORKS mold designers how to insert Parting Lines, apply Tooling Splits, generate Parting Surfaces, and apply Shut-off Surfaces. Users will also learn how to analyze parts for mold design using Draft Analysis and Undercut Detection. Key topics include: Scaling for Shrinkage, Core Features, Body Feature History, Mold Assembly, and Resolving Draft Problems.
Duration: 3 hrs. Skill level: Advanced

image
Overview: This course is designed to teach you the fundamentals of creating and running Motion studies for your SOLIDWORKS models, from more... simple animations to dynamic motion analyses. You will learn what Motion is and what you can do with it, the basic concepts involved in a motion study, how to define contact and friction, CAM integration, motion optimization, and how Motion works with SOLIDWORKS Simulation.
Duration: 4 hrs. Skill level: Advanced

image
Overview: The SOLIDWORKS 2013 Surface Design course is intended to teach users how to generate complex surfaces using lofts and sweeps more...with guide curves. You`ll also learn techniques for editing surfaces including trim, extend, fillet and knit surfaces. Upon completion of this course, you`ll be ready to start working with complex surfaces.
Duration: 3 hrs. Skill level: Advanced

image
Overview: This course is designed to teach users how to work with weldments in SOLIDWORKS 2013. You’ll learn how to create weldments, a more...pply welds, manage weldments, and document your weldments in drawings. Upon completion of this course, you’ll have the tools you need to use SOLIDWORKS 2013 for your weldments. The course duration is approximately 3 hours and 30 minutes.
Duration: 3 hrs. Skill level: Advanced

image
Overview: This course is designed to teach you how to create and manage both electrical and conduit routes using the SolidWorks Routing more... add-in. Included in this course is an overview of how to create electrical routing components and their design requirements. Users will also learn how to document wire information, create flatten route/harness drawings, and use custom libraries. Key topics include: routing options, system options, library components, Excel, cable route, manual route, from/to list, reroute, coverings, flatten route drawings, pipe/conduit route, electrical route, and flexible conduit.
Duration: 2 hrs. Skill level: Advanced

image
Overview: SolidWorks Flow Simulation is a full featured Computation fluid dynamics (CFD) program that simplifies your computational flu more...id dynamic studies, making them more accessible to the average user. Where FloXpress has its limitations, Flow Simulation provides increased parameter and boundary control, a variety of plots, mesh refinement, and transient analysis. Use it to simulate liquid and gas flow in real world conditions, run "what if" scenarios, heat transfer studies, and much more. The SolidWorks Flow Simulation 2012 course will teach you how to set up, run and view results of a fluid flow and/or heat transfer analysis using SolidWorks Flow Simulation. It will guide you through the necessary commands, menus, and options required to run a Flow Simulation analysis. Project lessons let you practice various simulation studies, helping you to reinforce what you`ve learned.
Duration: 4 hrs. Skill level: Advanced

image
Overview: This course topic is intended to teach users how to create molds for parts using the various mold automation tools available more...in SolidWorks. The course initially walks users through industry standards and mold design basics, providing a better foundation for your mold designs. The second half of the course shows SolidWorks mold designers how to insert Parting Lines, apply Tooling Splits, generate Parting Surfaces, and apply Shut-off Surfaces. Users will also learn how to analyze parts for mold design using Draft Analysis and Undercut Detection. Key topics include: scale for shrinkage, core feature, body feature history, mold assembly, and resolving draft problems.
Duration: 3 hrs. Skill level: Advanced

image
Overview: The SolidWorks Piping and Tubing course teaches you how to create and manage both pipe and tube routes. Included in the cours more...e is an overview of 3D sketching for routing, how to create routing components and their design requirements. You will also learn how to export route data, create route drawings and how to create your own custom fitting libraries.
Duration: 2 hrs. Skill level: Advanced

image
Overview: The SolidWorks 2012 Surface Design course is intended to teach users how to generate complex surfaces using lofts and sweeps more...with guide curves. You'll also learn techniques for editing surfaces including trim, extend, fillet and knit surfaces. Upon completion of this course, you'll be ready to start working with complex surfaces. The course duration is approximately 3 hours and 3 minutes.
Duration: 4 hrs. Skill level: Advanced

image
Overview: This course is designed to teach users how to work with weldments in SolidWorks 2012. You’ll learn how to create weldments, m more...anage weldments, and document your weldments in drawings. Upon completion of this course, you’ll have the tools you need to use SolidWorks 2012 for your weldments. The course duration is approximately 1 hours and 30 minutes.
Duration: 2 hrs. Skill level: Advanced

image
Overview: SolidWorks 2011 Flow SImulation is a Computational Fluid Dynamics analysis software that will help you solve Fluid Flow, heat more... transfer, HVAC and other Fluid Flow problems. SolidWorks Flow Simulation will help simulate and make sure the intended application meets your needs before the manufacturing process.
Duration: 3 hrs. Skill level: Advanced

image
Overview: This course topic is intended to teach users how to create molds for parts using the various mold automation tools available more...in SolidWorks. The course shows users how to insert Parting Lines, apply Tooling Splits, generate Parting Surfaces, and apply Shut-off Surfaces. Users will also learn how to analyze parts for mold design using Draft Analysis and Undercut Detection. Key topics include: scale for shrinkage, core feature, body feature history, mold assembly, and resolving draft problems.
Duration: 3 hrs. Skill level: Advanced

image
Overview: The SolidWorks 2011 Routing course is designed to teach you how to create and manage pipe, tube, electrical, and conduit rout more...es. Topics include 3D sketching for routing, routing components, routing drawings, electrical routing components, custom libraries, rerouting, and system options. Upon completion of this course, you’ll be ready to create electrical and conduit routes, as well as pipe and tube routes. The course duration is approximately 3 hours and 6 minutes.
Duration: 3 hrs. Skill level: Advanced

image
Overview: The SolidWorks 2011 Routing course is designed to teach you how to create and manage pipe, tube, electrical, and conduit rout more...es. Topics include 3D sketching for routing, routing components, routing drawings, electrical routing components, custom libraries, rerouting, and system options. Upon completion of this course, you’ll be ready to create electrical and conduit routes, as well as pipe and tube routes. The course duration is approximately 3 hours and 6 minutes.
Duration: 3 hrs. Skill level: Advanced

image
Overview: The SolidWorks 2011 Surface Design course is intended to teach users how to generate complex surfaces using lofts and sweeps more...with guide curves. You`ll also learn techniques for editing surfaces including trim, extend, fillet and knit surfaces. Upon completion of this course, you`ll be ready to start working with complex surfaces. The course duration is approximately 3 hours and 3 minutes.
Duration: 4 hrs. Skill level: Advanced

image
Overview: This course is designed to teach users how to work with weldments in SolidWorks 2011. You’ll learn how to create weldments, m more...anage weldments, and document your weldments in drawings. Upon completion of this course, you’ll have the tools you need to use SolidWorks 2011 for your weldments. The course duration is approximately 1 hours and 27 minutes.
Duration: 2 hrs. Skill level: Advanced

image
Overview: This course is intended to teach users how to create molds for parts using the various mold automation tools available in Sol more...idWorks. The course shows users how to insert Parting Lines, apply Tooling Splits, generate Parting Surfaces, and apply Shut-off Surfaces. Users will also learn how to analyze parts for mold design using Draft Analysis and Undercut Detection. Key topics include: scale for shrinkage, core feature, body feature history, mold assembly, and resolving draft problems. The course duration is approximately 1 hour.
Duration: 3 hrs. Skill level: Advanced

image
Overview: The SolidWorks 2010 Routing course is designed to teach you how to create and manage pipe, tube, electrical, and conduit rout more...es. Topics include 3D sketching for routing, routing components, routing drawings, electrical routing components, custom libraries, rerouting, and system options. Upon completion of this course, you’ll be ready to create electrical and conduit routes, as well as pipe and tube routes. The course duration is approximately 3 hours and 6 minutes.
Duration: 3 hrs. Skill level: Advanced

image
Overview: The SolidWorks 2010 Routing course is designed to teach you how to create and manage pipe, tube, electrical, and conduit rout more...es. Topics include 3D sketching for routing, routing components, routing drawings, electrical routing components, custom libraries, rerouting, and system options. Upon completion of this course, you’ll be ready to create electrical and conduit routes, as well as pipe and tube routes. The course duration is approximately 3 hours and 6 minutes.
Duration: 3 hrs. Skill level: Advanced

image
Overview: The SolidWorks 2010 Simulation – Frequency Analysis course covers the basics of Frequency Analysis and vibration concepts uti more...lizing the primarily FEA approach of SolidWorks Simulation. Among the concepts covered are Vibrations, Waves, Natural Frequency, Resonance and Modal shape analysis. Upon completion of this course, you will be able to study the effects of vibrations and frequencies on models and parts. The course duration is approximately 1 hours and 30 minutes.
Duration: 1 hrs. Skill level: Advanced

image
Overview: The SolidWorks 2010 Simulation - Thermal Analysis course covers the basics of Thermal Analysis and Heat Tranfer concepts usin more...g the FEA environment of SolidWorks Simulation. You will learn the importance of Thermal Analysis, Transient and Steady State Analyses, Conduction, Convection, Radiation and the Thermal Simulation process. Upon completion of this course, you’ll be ready to analyze thermal effects on your models. The course duration is approximately 1 hours and 30 minutes.
Duration: 1 hrs. Skill level: Advanced

image
Overview: The SolidWorks 2010 Surface Design course is intended to teach users how to generate complex surfaces using lofts and sweeps more...with guide curves. You'll also learn techniques for editing surfaces including trim, extend, fillet and knit surfaces. Upon completion of this course, you'll be ready to start working with complex surfaces. The course duration is approximately 3 hours and 3 minutes.
Duration: 4 hrs. Skill level: Advanced

image
Overview: This course is designed to teach users how to work with weldments in SolidWorks 2010. You’ll learn how to create weldments, m more...anage weldments, and document your weldments in drawings. Upon completion of this course, you’ll have the tools you need to use SolidWorks 2010 for your weldments. The course duration is approximately 1 hours and 27 minutes.
Duration: 2 hrs. Skill level: Advanced

image
Overview: The SolidWorks 2009 Routing course is a combination of our Electrical Systems and Piping and Tubing courses from previous ver more...sions. The course is designed to teach you how to create and manage pipe, tube, electrical, and conduit routes. Topics include 3D sketching for routing, routing components, routing drawings, electrical routing components, custom libraries, rerouting, and system options. Upon completion of this course, you’ll be ready to create electrical and conduit routes, as well as pipe and tube routes.
Duration: 3 hrs. Skill level: Advanced

image
Overview: The SolidWorks 2009 Routing course is a combination of our Electrical Systems and Piping and Tubing courses from previous ver more...sions. The course is designed to teach you how to create and manage pipe, tube, electrical, and conduit routes. Topics include 3D sketching for routing, routing components, routing drawings, electrical routing components, custom libraries, rerouting, and system options. Upon completion of this course, you’ll be ready to create electrical and conduit routes, as well as pipe and tube routes.
Duration: 3 hrs. Skill level: Advanced

image
Overview: This course is intended to teach users how to generate complex surfaces in SolidWorks 2009. Users will also learn how to edit more... surfaces. Key topics include: C0 & C1 Curvature, C1 & C2 curvature, splines, Fit Spline tool, loft section, intersection curve, face curve, trim, draft, fillet, thicken, projected curve, sweep guide, selection manager, boundary feature, freeform feature, flex feature, import options, fill surface, ruled surface, and move/copy body.
Duration: 4 hrs. Skill level: Advanced

image
Overview: This course is designed to teach users how to create, manage, and document weldments in SolidWorks 2009. Key topics include: more...Weldments toolbar, 3D sketch, structural members, profile pierce point, trim extend, complex joints, gussets, end caps, fillet beads, custom profiles, sub-weldments, feature scope, cut lists, custom properties, ballooning, and weld symbols.
Duration: 2 hrs. Skill level: Advanced

image
Overview: This course is intended to teach users how to generate complex surfaces in SolidWorks. Users will also learn how to edit surf more...aces. Key topics include: C0 & C1 Curvature, C1 & C2 curvature, splines, Fit Spline tool, loft section, intersection curve, face curve, trim, draft, fillet, thicken, projected curve, sweep guide, selection manager, boundary feature, freeform feature, flex feature, import options, fill surface, ruled surface, and move/copy body.
Duration: Not Available hrs. Skill level: Advanced

image
Overview: This course is designed to teach you how to create and manage both electrical and conduit routes using the SolidWorks Routing more... add-in. Included in this course is an overview of how to create electrical routing components and their design requirements. Students will also learn how to document wire information, create nail board/harness drawings, and use custom libraries. Key topics include: routing options, system options, library components, Excel, cable route, manual route, from/to list, reroute, coverings, nail board, drawings, pipe/conduit route, electrical route, and flexible conduit.
Duration: Not Available hrs. Skill level: Advanced

image
Overview: This course is intended to teach users how to create molds for parts using the various mold automation tools available in Sol more...idWorks. This course shows users how to insert Parting Lines, apply Tooling Splits, generate Parting Surfaces, and apply Shut-off Surfaces. Users will also learn how to analyze parts for mold design using Draft Analysis and Undercut Detection. An overview of the MoldflowXpress plastic fill analysis tool is also featured. Key topics include: move face, scale for shrinkage, core feature, body feature history, mold assembly, and resolving fill problems.
Duration: Not Available hrs. Skill level: Advanced

image
Overview: The SolidWorks piping and tubing course teaches you how to create and manage both pipe and tube routes. Included in the cours more...e is an overview of 3D sketching for routing, how to create routing components and their design requirements. You will also learn how to export route data, create route drawings and how to create your own custom fitting libraries. Course completion time: 4 Hours.
Duration: Not Available hrs. Skill level: Advanced

image
Overview: This course is intended to teach users how to generate complex surfaces in SolidWorks. Users will also learn how to edit surf more...aces. Key topics include: C0 & C1 Curvature, C1 & C2 curvature, splines, Fit Spline tool, loft section, intersection curve, face curve, trim, draft, fillet, thicken, projected curve, sweep guide, selection manager, boundary feature, freeform feature, flex feature, import options, fill surface, ruled surface, and move/copy body.
Duration: Not Available hrs. Skill level: Advanced

image
Overview: This course is designed to teach users how to create, manage, and document weldments in SolidWorks. Key topics include: Weldm more...ents toolbar, 3D sketch, structural members, profile pierce point, trim extend, complex joints, gussets, end caps, fillet beads, custom profiles, sub-weldments, feature scope, cut lists, custom properties, ballooning, and weld symbols.
Duration: Not Available hrs. Skill level: Advanced